DESIGN YOUR OWN CUSTOM STROKER SHORT BLOCK. FROM PUMP GAS TORQUE MONSTER TO HIGH COMPRESSION LIGHT WEIGHT RACE KITS. YOU CAN BUILD UP TO A 471CID SMALL BLOCK MOPAR WITH OUR SPECIAL "UBER" BIG BORE BLOCKS!
*1964-1992 "A" OR "LA" ENGINES (273/318/340/360)
*1992-2003 MAGNUM 5.2L OR 5.9L ENGINES
BLOCKS
YOUR CHOICE OF EARLY OR LATE BLOCK
DARTON .200" THICK DRY SLEEVES
DARTON SLEEVE INSTALLATION
CNC BORED & TORQUE PLATE HONED
MILODON SPLAYED 4-BOLT CAP CONVERSION
CNC LINE BORED MAIN BORES
CNC DECK SURFACED TO RA50 FINISH
COATED CAMSHAFT BEARINGS INSTALLED
CRANKSHAFTS
CUSTOM 4340 FORGED STEEL CRANK (60LBS)
AVAILABLE IN STROKES FROM 3.380" TO 4.200"
AVAILABLE IN 318/340/5.2L MAINS OR 360/5.9L MAINS
AVAILABLE w/ PENDELUM UNDER-CUT COUNTERWEIGHTS (-7 LBS)
AVAILABLE w/ PROFILED AERO-WING COUNTERWEIGHTS & LIGHTENING DRILLED ROD THROWS
CONNECTING RODS
CUSTOM 4340 FORGED LIGHT WEIGHT H-BEAM RODS w/ ARP 2000 CAP-SCREWS (575g)
AVAILABLE IN 6.000", 6.125", 6.200", 6.250", AND 6.300" LENGTHS OR
AVAILABLE w/ CUSTOM ALUMINUM RODS (WILL NOT STRETCH OR CYCLE, ABSOLUTELY SAFE FOR STREET USE!)
CUSTOM PISTONS
CUSTOM 2618 FORGED ALUMINUM
SPECIFY YOUR OWN CUSTOM COMPRESSION RATIO
SPECIFY YOUR OWN BORE SIZE (S-O-M UBER BIG BORE BLOCKS)
SPECIFY YOUR OWN RING GROOVE SIZES
INCLUDES PINS, LOCKS, AND RAIL SUPPORTS
AVAILABLE w/ "F-S-R" LIGHTWEIGHT PROFILING
TOTAL SEAL PLASMA MOLY RING SET
SPECIFY YOUR OWN BORE SIZE AND GROOVE SIZES
AVAILABLE w/ GAPLESS TOP RINGS
AVAILABLE w/ NAPIER SECOND & LOW TENSION OIL RINGS
CLEVITE BEARINGS
RACE SERIES MAIN & ROD BEARINGS w/ FULL GROOVE OILING
AVAILABLE w/ MOLYDYSULFIDE LOW FRICTION COATINGS
*NOTE - ALLOW 1.230" FOR TYPICAL PISTON COMPRESSION HEIGHT
BLOCK HEIGHTS: 318/5.2L = 9.578" 360/5.9L = 9.599"
ROTATING HEIGHT = 1/2 CRANK STROKE + ROD LENGTH + PISTON COMPRESSION HEIGHT
FREE SHIPPING!!!
CUSTOMER PAYS SHIPPING INSURANCE
